Multi-parameter Patient Monitor
-
Multi-parameter patient monitor can provide important patient information for medical clinical diagnosis. Through various functional modules, it can detect the human body's ECG signal, heart rate, blood oxygen saturation, blood pressure, respiratory rate and body temperature and other important parameters in real time, and realize the supervision and alarm of each parameter. Suitable for vital signs monitoring of neonates, children, adults, the elderly in operating room, ward, ICU, outpatient, bedside monitoring etc.
Specification:
Display
Real color TFT screen
Application
Adult/ Pediatric/ Neonatal
Medical center/ Surgery/ Operating Room/ ICU/ CCU
Parameters
SpO2, PR
Temperature & EtCo2 is optional
ECG
5 Leads: RA, LA, LL, RL, V
Lead mode: I, II, III, AVR, AVL, AVF, V
Gain: × 1.25mm/mV,2.5mm/mV,
5.0mm/mV, 10mm/mV,
20mm/mV (error ≤ 5%)
Sweep speed: 6.25mm/s,12.5mm/s,25mm/s,
50mm/s (error ≤ ± 10%)
Bandwidth: Surgery 1 ~ 25 Hz
Monitor 0.5 ~ 40 Hz
Diagnostic 0.05 ~ 130 Hz
Sensitivity: >200 μ V P-P
CMRR: ≥ 112dB
Differential Input Impedance: >5M
ohm Electrode Offset Potential: ±300mV
Polarization Voltage: ≥ ± 500mV
Input Impedance: ≥ 5 M
Calibration Voltage: 1mV ± 5%
ST Segment
ST Segment Range: -2.0mV ~ +2.0mV
Accuracy: 0.02mV
SpO2
Measurement range: 0 ~ 100%
Resolution: 1%
Accuracy: 70% ~ 100% ± 2%, 40% ~ 69% ± 3%
Pulse Rate
Measure/alarm range: 20 ~ 300bpm
Resolution: 1bpm
Accuracy: ± 3bpm
TEMP
Channel 2
Measure & alarm range: 0 ~ 50 ℃
Resolution: 0.1 ℃
Accuracy (no sensor): ±0.1 ℃ (0~50 ℃)
NIBP
Method: Oscillometry
Measure mode: Manual, Auto, STAT
Measure interval in auto mode: 1~5/10/15/30/60/90/120/180/240/480min
Measure period in STAT mode: 5min
Pulse rate range: 40 ~ 240bpm
Measure & alarm range:
Adult
SYS 40 ~ 280mmHg
DIA 10 ~ 220mmHg
MEAN 20 ~ 240mmHg
Pediatric
SYS 40 ~ 220mmHg
DIA 10 ~ 160mmHg
MEAN 20 ~ 170mmHg
Neonatal
SYS 40 ~ 135mmHg
DIA 10 ~ 100mmHg
MEAN 20 ~ 110mmHg
Static pressure measurement
Range: 0 ~ 300mmHg
Accuracy: ± 3mmHg
Resolution: 1mmHg Accuracy:
Max. Mean Error: ± 5mmHg
Max. Standard Deviation: 8mmHg
Overpressure protection: Adult 300mmHg, Pediatric 240mmHg. Neonatal 150mmHg
RESP
Method: impedance between RA-LL
Resp Impedance range: 0.3 ~ 3 Ω
Base Impedance range: 200 Ω ~ 4000 Ω
Bandwidth: 0.3 ~ 2.5Hz
Gain: × 0.25, × 0.5, × 1, × 2, × 4
Resp rate:
Measurement Range
Adult 0 ~ 120BrPM
Neonatal/Pediatric 0 ~ 150BrPM
Resolution: 1BrPM
Accuracy: 7 ~ 150BrPM ( ± 2BrPM)
0 ~ 6BrPM (unspecified)
Apnea Alarm: 10 ~ 40s
Environment Requirements
Operation Temperature: 0~40℃
Storage Temperature: -20~+55℃
Humidity: 15%~80% in operation; 10%~90% in storage
Atmosphere Pressure: 86kPa~106kPa
Power supply
AC: 100 ~ 240V, 50Hz/60Hz
DC: Built-in rechargeable battery
Battery: 11.1V 24wh Li-ion battery
2h operating after full charge
5min operating after low battery alarm
Data Storage
Trend diagram/table: 720h
NIBP review: 10000 events
Wave review: 12h
Alarm review: 200 alarm events
Support drug concentration titration analysis
Standard Accessories
- NIBP cuff & tube
- ECG cable & electrodes
- SpO2 sensor
- TEMP probe
- Lithium-ion battery
- Power cable
Optional Accessories
- IBP
- CO2
- Nellcor SpO2
Product Performance:
- 8 parameters (ECG, RESP, SPO2, NIBP, PR, TEMP, IBP, ETCO2)+ Fully independent module (Independent ECG + Nellcor + Suntech blood pressure + dual IBP);
- Anti-fibrillation, anti-high-frequency electrosurgical interference, support diagnosis, monitoring, surgery three monitoring modes, support wire or wireless central monitoring system;
- Automatic data storage function: supports nearly 96 hours of historical monitoring data query;
- Built-in high capacity lithium battery (4 hours) for emergency power outage or patient transfer;
- 3 level audio/visual alarm function;
- 12.1 inch color LCD touch screen supports multiple language modes;
- Optional printing function, suitable for operating room, ward and other scenes.
Optional Configuration:
Recorder, mobile trolley, wall mounting, touch screen, thermal printer.
